BJTs
The ICS Instructions contain the basic procedures for
making measurements and performing modeling. This screen is intended
to point out things unique to using the PNP model file.
Device Selection
You should measure one of the square emitter BJTs. The third BJT
from the left on the bottom row is recommended. Normally, you will
be required to measure 3 such BJTs from different device cells.
Probe Assignments
- SMU1/probe1/CM(H)---->Base
- SMU2/probe2---->Collector
- SMU3/probe3---->Emitter
- SMU4/probe4 is not used.
Note: CM(L) will have to be moved between the Collector(probe2) and Emitter(probe3) as needed to complete the measurements.
|